Min.: 0 m³/h (0 ft³/h)
Max.: 4,000 m³/h (141,258.7 ft³/h)
Air dehumidifier for mold booths.
Mold Dryer is an air dehumidifier used mainly to prevent the formation of condensation on the surface of the molds, due to the use of low temperature cooling. The air dehumidifiers guarantee optimal working conditions to increase production and reduce waste caused by condensation The system is mainly applied in the packaging sectors:
Extrusion blow molding
Injection blow molding
Production not affected by climatic conditions.
Constant production quality.
Reduced maintenance and increased mold life.
High energy savings compared to traditional systems.
Flow up to 4,000 m3/hr (2,355 cfm)
8 models with capacities from 300 to 4,000 m3/hr (175 to 2,355 cfm).
Desiccant dehumidification system with active metal silicate rotor.
Pre- and post-cooling heat exchangers.
Compact and easy to install.
Air dew point at -9.5 °C (15 ˚F).
PLUS version, with digital control via PLC (optional).